OmniMASK® : THREAD MASKING AND PROTECTION OF THREADED FASTENERS
Applied on threads, omnimask is a thin masking layer which prevents from the adhesion of weld spatters and paint deposit. Omnimask® can be applied on different threaded parts such as: screws, weld and self-clinching studs, weld and self-clinching nuts…
Omnimask® is a white 98% Teflon, reliable FEP Fluoropolymer powder coating. This dry film enables a better screwing installation thanks to his low coefficient of friction.
OmniMASK® is applied by projection of a powder on pre-heated parts via induction coil. The process temperature of omniMASK is lower (-50°c) than equivalent competitive products. Due to its lower melting temperature, it can be applied on main plating surface. The parts are coated on our plant and can be then used without specific caution.
Designation | Diameter | Type |
Pin | M4 to M12 | Soldering or crimping All type of head |
Nut | M6 to M14 | Soldering or crimping Round or square head |
ADVANTAGES
Prevents of adhesion of electrodeposited paints and primers on the threaded area of fasteners
Prevents of adhesion of weld spatter.
Eliminates the expensive manual operation of installing and removing caps and plugs
Can be applied onto internal or external threads
Can be used on a wide range of materials and surface treatments.
Solvent resistant and high temperature compatibility.
Eliminates scrap and reduces significantly the total cost manufacturing
Enables to control the coefficient of friction and so reduces the torque vs tension variation
CHARACTERISTICS AND PRODUCTS
Material | Powder Tèflon® FEP |
Color | White |
Coefficient of friction | 0.09-0.15 |
QUALITY
Our processes are ISO 9001 certified and fulfill specific requirements in the automotive industry.
APPROVALS
OmniMASK® is highly used in the automotive applications. It is homologated for those specifications :
- GMW15822
- WWS-M12P27 A3
- FCA PS.50015
- DAIMLER MBN10391
- VW TL188